Home / Products / Acetic Acid (GAA) CAS 64-19-7

Contact Us

 +86-29 8874 5613-828
  +86-18729249570
 : albert@yuanfar.com
 Fenghui South Road, Dev.Zone of 
High-Tech Ind.,Xi’an, China 710075
Share to:

Acetic Acid (GAA) CAS 64-19-7

  • 64-19-7
  • Glacial Acetic Acid/GAA
  • C2H4O2
  • ISO TANKS /DRUMS,or as you request
  • Clear liquid, without floating substance

Acetic Acid Information 

CAS NO.64-19-7 
AliasGlacial Acetic Acid/GAA
Molecular FormulaC2H4O2
AppearanceClear liquid, without floating substance
ASSAY99.5%Min
UN NO.2789
HazardClass8(3)
PackingGroupII
PackageISO TANKS /DRUMS,or as you request

Glacial Acetic Acid Technical Data Sheet(99%Min)

ITEMSSPECIFICATION
AppearanceClear liquid, without floating substance
Acetic acid,%≥99.5
Water content (%) ≤0.15
Color (in Hazen) (Pt-Co)≤10
Formic acid,%≤0.05
Acetaldehyde,ppm≤0.03
potassium permanganate,min≥5
Fe,ppm≤0.0001
I- ,PPB10
CH3I,PPB/
Ag,PPB/

Acetic Acid CAS 64 19 7 Methods of production

1. Acetaldehyde oxidation method Acetaldehyde and manganese acetate are added to the oxidation tower from the bottom of the tower, and oxygen is passed into the tower in stages. The reaction temperature is controlled in the range of 70 ~ 75℃, the gas phase pressure at the top of the tower is maintained at 0.098MPa, and an appropriate amount of nitrogen is added to the top of the tower to prevent the explosion of the gas phase. The freezing point of the crude acetic acid generated by the reaction should be between 8.5 ~ 9.0℃, and the material should be discharged continuously into the refining section. The tail gas is cooled at low temperature, the condensate is reflux to the oxidation tower, and the gas is vented. Crude acetic acid continues to enter the concentrator, and the temperature on the top of the tower is controlled at 95 ~ 103℃. The dilute acetic acid condensed by the condenser is recovered in the dilute acid recovery tower, and the uncondensable gas is condensed into dilute acetaldehyde by the low-temperature condenser. The crude acetic acid with low boiling point was continuously added to the acetic acid evaporation pot, and the temperature on the top of the tower was maintained at about 120℃, and the distilled acetic acid was the finished product. Using rhodium's carbonyl compounds and iodide as catalysts, methanol and carbon monoxide react to produce acetic acid in water-acetic acid medium at about 175℃ and under 3.0MPa. The reaction products were successively delightened component column and dehydrated column, and the separated light component and aqueous acetic acid were returned to the reaction system. The crude product was then distilled and purified to produce acetic acid. The exhaust gas of the reaction is washed with cold methanol first to recover the iodine methane (intermediate product) taken out, and then sent to the carbon monoxide recovery device. 3 Liquid phase oxidation of low carbon alkanes usually takes butane as raw material, acetic acid as solvent, cobalt acetate as catalyst, air as oxidant, at 170 ~ 180℃ : and 5.5MPa. Can also be 30 ~ 100℃ light oil as raw material. The mixed acid was separated into acetic acid by six columns.

GAA CAS 64 19 7 APPLICATION

Acetic acid is a major chemical product and one of the most important organic acids. Mainly used in the preparation of acetic anhydride, vinyl acetate, acetate, metal acetate, chloroacetic acid, cellulose acetate, etc., used in the production of ethyl acetate, edible flavor, wine flavor and other analytical reagent, solvent and leaching agent


Related Products

content is empty!

YUANFAR CHEMICAL have been engaged in chemical business since 2001, and has our own factories  manufacturing hydrazine product

Quick Link

Contact Us

 +86-29 8874 5613-828
 +86-18729249570
 : albert@yuanfar.com
 Fenghui South Road, Dev.Zone of 
High-Tech Ind.,Xi’an, China 710075

Send Message
Copyright © 2021 XI’AN YUANFAR INTERNATIONAL TRADE COMPANY All Rights Reserved.